Microcement Bathrooms and Wet Rooms: The Complete 2026 Guide
Microcement Bathrooms in Bristol, Bath & the South West
Seamless Waterproof Finishes with Valpaint E-VOLUTION
A microcement bathroom is a seamless, grout free alternative to tiles. Applicators trowel it by hand over walls and floors, including inside showers and wet rooms. With a waterproof system such as Valpaint E-VOLUTION, installed prices start from £90 per square metre in the UK. Above all, you get one continuous, easy to clean surface.
Bathrooms are where microcement makes its strongest case. Tiles divide a room into a grid of grout lines, and those lines discolour over time. A microcement surface, however, runs continuously across walls, floors, niches and curbs. As a result, the room feels calmer, larger and far easier to keep clean. For example, our recent seamless walk in shower project in Bath shows the effect in a compact space.
Why microcement works so well in bathrooms and wet rooms
A hand applied microcement finish offers three clear benefits. First, you get a continuous surface with no traditional grout joints. Second, we mix a bespoke colour for your room instead of matching a tile range. Third, the soft mineral texture changes gently with the light. Because applicators build the finish in thin layers, it adds very little height to existing floors. Consequently, it suits refurbishments where every millimetre matters.
Is microcement waterproof? The system is what matters
This question decides whether a microcement bathroom succeeds. A standard decorative microcement is water resistant rather than waterproof. Therefore, for showers and wet rooms we use Valpaint E-VOLUTION, a system that the manufacturer designed specifically for wet areas. In other words, the waterproofing comes from the full system: primer, membrane where needed, base coats, colour and sealer. We apply every layer ourselves, so we also stand behind the result.
Where you can use it
The same approach covers shower enclosures, wet room floors, bathroom walls, vanity tops and bath surrounds. In addition, it works around niches, benches and curved walls. Because there are no joints, water has far fewer places to creep in. That is why wet rooms suit this material so well.
Can it go over existing tiles?
Often, yes. Valpaint confirms that E-VOLUTION can go over existing tiles once we prepare them correctly. First, we check that the tiles are sound and well bonded. Then we prime, fill the joints and build the new surface on top. As a result, you avoid the mess, noise and cost of a full rip out.
How much does a microcement bathroom cost in the UK?
Prices depend on three things: the size of the room, the condition of the existing surfaces, and the finish you choose. Here are honest starting figures.
| Application | Guide price (supply and install) |
|---|---|
| Microcement walls | From £90 per m² |
| Bathroom walls, waterproof system | From £120 per m² |
| Microcement and wet room floors | From £110 per m² |
| Polished plaster bathroom finish | From £100 per m² |
| Full wet rooms with shower trays and surrounds | From £1,800 per project |
For context, walls start from £120 per square metre in wet areas, and floors start from £110. Moreover, most en suites take less than a week on site. For a full picture, see our microcement in Bristol page or request a quote.
Looking after a microcement bathroom
Day to day, a microcement bathroom is simple to look after. Wipe it with a soft cloth and a pH neutral cleaner. Avoid harsh abrasives, because they can dull the sealer over time. In addition, ventilate the room as you would any bathroom. Every few years, a specialist can refresh the sealer. Consequently, the surface keeps its depth and water resistance for many years.
Microcement bathrooms across Bristol, Bath and the South West
Antichi Decori is based in Bristol, and our Italian trained team installs microcement bathrooms across Bath, Cheltenham, Gloucester, Somerset and South Wales. We are also the official UK distributor for Valpaint, so we supply the genuine system and apply it ourselves. For real examples, browse the projects gallery or our microcement kitchen splashback case study.
Frequently Asked Questions
About the system and installation
Is microcement waterproof?
It depends on the system. Standard decorative microcement is water resistant rather than waterproof, which is why the system choice matters in a bathroom. Valpaint E-VOLUTION is a decorative system designed for surfaces exposed to water, including shower interiors, and includes a transparent bi-component resin that contributes to the water resistant finish.
Can microcement be used inside a shower?
Yes, provided a suitable waterproof system is used and the manufacturer’s preparation and application requirements are followed. Valpaint states that E-VOLUTION is specially formulated for the walls and floors of bathrooms and shower interiors, which is the system we use for wet areas.
How much does a microcement bathroom cost in the UK?
As a guide, microcement starts from £90 per square metre supplied and installed, with bathroom walls from £120 per square metre and wet room floors from £110 per square metre. Full wet rooms including shower trays and surrounds start from £1,800, and most projects have a practical minimum size of around 20 square metres. Every bathroom is quoted individually.
Can microcement be applied over existing bathroom tiles?
In many cases, yes. Valpaint states that E-VOLUTION can be used to cover suitable existing tiles, subject to a correct assessment of the substrate and the preparation steps set out in the technical documentation. This often avoids stripping walls back during a refurbishment.
Costs, care and practicalities
Is microcement slippery in a wet room?
It does not have to be. The slip resistance of a microcement floor comes from the texture of the finish and the sealer specified, and a matt finish with more surface grip can be chosen for wet room floors. This is one of the things we agree at the sample stage.
How long does a microcement bathroom take?
Most bathrooms take roughly four to seven days on site, depending on the size of the room, the number of layers and the curing time between coats. We confirm a realistic programme for your project before work starts.
Do you install microcement bathrooms in Bristol and Bath?
Yes. Antichi Decori installs microcement bathrooms, wet rooms and waterproof decorative finishes across Bristol, Bath, Cheltenham, Gloucester, Somerset, South Wales and the surrounding areas.
Planning a bathroom or wet room refurbishment? Get in touch for samples and a quote. We will recommend the right system, colours and finish for your space.
Andrea
Typically replies within an hour
I will be back soon
Buongiorno! Welcome to Antichi Decori. We're passionate about transforming walls with premium Italian finishes. How can I assist: quote, inspiration, or Valpaint questions?
