Logo feature wall in Valpaint Meteore lime plaster and Klondike metallic finish at Tamburino restaurant, Sherborne

Restaurant renovation and refurbishment · Sherborne, Dorset · January 2024

Restaurant Renovation and Refurbishment in Sherborne, a metallic logo wall for Tamburino

For this restaurant renovation at Tamburino in Sherborne, Dorset, we created a logo feature wall of about 25 m², with the restaurant’s name stencilled into a warm metallic lime plaster finish.

  • About 25 m²
  • January 2024
  • Valpaint Meteore 10 and Klondike

The short answerHow can a feature wall renovate a restaurant?

In a restaurant renovation or refurbishment, one decorative wall can change the whole dining room. A logo feature wall is a plaster wall with a business name or logo built into the finish, instead of a printed sign or vinyl lettering fixed on top.

At Tamburino in Sherborne, the restaurant wanted its name on the main dining wall without a sign. So we turned the Tamburino logo into a stencil and laid it into a metallic plaster finish that glows under the pendant lights.

This is a real, invoiced project. In addition, the photos below were taken on site by our team, and the materials come from our own job sheet.

The finished wallThe restaurant renovation in photos

Because the wall faces every table, the finish had to look good both up close and across the room.

Tamburino logo stencilled into a bronze metallic lime plaster wall at Tamburino restaurant, Sherborne

Logo detail

The name, built into the wall

The script logo sits inside the plaster, so it catches the light instead of sitting on top of it like a sign.

Restaurant feature wall in Valpaint Meteore lime plaster and Klondike metallic finish with the Tamburino logo, Sherborne

Feature wall

Metallic finish under pendant lights

Valpaint Klondike over Valpaint Meteore 10 gives a soft, moving shine. As a result, the wall glows under the copper pendants.

Tamburino Sherborne dining room with a metallic plaster feature wall behind the booth seating

Dining room

A warm backdrop for the whole room

In addition, the finished wall runs behind the booths and ties the dining room together.

Close view of the Klondike metallic plaster finish around a window above the booths at Tamburino Sherborne

Close up

Texture around the window

Also, the metallic layer follows every edge and reveal around the internal window.

Living green wall panel set against the metallic plaster restaurant feature wall at Tamburino Sherborne

Detail

Plaster behind the green wall

Meanwhile, the bronze tone sets off the restaurant’s living green wall panel.

Long metallic lime plaster wall above blue banquette seating at Tamburino Sherborne

Banquette wall

One continuous finish

Finally, one seamless surface runs above the blue banquettes, with no joints.

Tamburino Sherborne at a glance
LocationTamburino, Sherborne, Dorset
CompletedJanuary 2024
AreaAbout 25 m²
SystemValpaint Primer 1200, two coats of Valpaint Meteore 10 lime plaster, Valpaint Klondike metallic in colour 433 A with added gold, Valpaint V16 protective coat
Custom detailTamburino logo stencil made from the restaurant’s own logo file

How we did itHow we carried out the restaurant renovation

Every step below comes from the job sheet for this wall.

  1. Logo and colours

    First, the restaurant sent its logo file and the colours of the room, so the finish would match the interior.

  2. Custom stencil

    Next, we turned the logo into a stencil sized to the wall.

  3. Primer

    Then the wall was primed with Valpaint Primer 1200.

  4. Lime plaster

    After that, two coats of Valpaint Meteore 10 lime plaster went on, with the logo stencil applied within the finish.

  5. Metallic and protection

    Finally, Valpaint Klondike in colour 433 A with added gold gave the metallic glow, and Valpaint V16 sealed the wall.

QuestionsRestaurant renovation questions

Can you put our logo into a feature wall?

Yes. For Tamburino we turned the restaurant’s own logo file into a custom stencil. Then we applied it within the plaster, so the logo feature wall shows the name as part of the finish rather than as a sign fixed to it.

Which Valpaint products did you use in Sherborne?

The wall was primed with Valpaint Primer 1200, then finished with two coats of Valpaint Meteore 10 lime plaster. After that came Valpaint Klondike metallic in colour 433 A with added gold, and finally a Valpaint V16 protective coat.

How long did the restaurant renovation take?

The quote for about 25 m² was signed on 9 January 2024 and the final invoice followed on 23 January 2024. So, overall, the job ran over roughly two weeks.

Do you take on restaurant renovations in Dorset?

Yes. Although we are based in Bristol, we travel for restaurant renovations and commercial work across the South West, including Dorset, Somerset and Bath.

How much does a restaurant renovation with a feature wall cost?

Each wall is priced from the area, the finish and the custom stencil. So, send us photos and measurements and we will send an itemised quote. Please note that all our prices exclude VAT.

Start your projectPlanning a restaurant, café or shop interior?

To start, send us a photo of the wall, or book a free survey. We will bring samples and send a clear, itemised quote.

Andrea

Andrea

Typically replies within an hour

I will be back soon

Andrea

Buongiorno!  Welcome to Antichi Decori. We're passionate about transforming walls with premium Italian finishes. How can I assist: quote, inspiration, or Valpaint questions?

WhatsApp